TinySA Spectrum Analyzer 100khz to 960Mhz Audio Spectrum Analyzer

R4110,00

Choose an option
Choose an option
United States
Clear
SKU: 1005003613395168 Categories: , Tags: ,

Description

TinySA Spectrum Analyzer Handheld Two Inputs Tiny 2.8 Inch Touching Screen 100khz to 960mhz Audio Spectrum Analyzers

  • Brand Name: jiansu
  • Origin: CN(Origin)
  • DIY Supplies: ELECTRICAL
  • Certification: None
  • use: tinySA Spectrum Analyzer
  • voltage: 5
  • measurement accuracy: 2ppm
  • Measuring range: 100kHz 350MHz
  • Frequency Range: 100kHz to 350MHz,240MHz
  • Display: 2.8 inch LCD

New Version Hand held tiny Spectrum analyzer TinySA 2.8″ display with battery

tinySA is not an SDR receiver and does not provide any demodulation function!
tinySA is not a frequency sweeper and does not provide tracking source output. If you need a frequency sweep function, please use NanoVNA!
For more questions and usage examples, please visit https://tinysa.org/

-User interface:
*Display resolution 320*240 pixels
* Screen diagonal 2.8″
* 16 bits per RGB pixels
* Resistive touch control
* Jog switch control
* USB serial port control
* Optional TTL USART port (SW not yet implemented) on the internal PCB
* Linear power supply to avoid switching noise.

-The input/output specification of the tinySA is split over the 4 modes


-Low input mode spec:

* Input frequency range from 100kHz to 350MHz
* Front attenuator: 0dB-31dB, step by 1dB manual and automatic input attenuator
* Absolute maximum input level without attenuation of +10dBm
* Absolute maximum input power with 30dB attenuation of +20dBm for short period
* Input Intercept Point of third order modulation products (IIP3) with 0dB attenuation of +15dBm
* 1dB compression point at +2dBm with 0dB attenuation
* Power detector resolution of 0.5dB and linearity versus frequency of +/-1dB
* Absolute power level accuracy after power level calibration of +/- 1dB
* Lowest discernible signal using a resolution bandwidth of 30kHz of -102dBm
* Frequency accuracy equal to the selected resolution bandwidth
* Phase noise of -90dB/Hz at 100kHz offset and -115dB/Hz at 1MHz offset
* Spur free dynamic range when using a 30kHz resolution bandwidth of 70dB
* Manually selectable resolution filters of 3, 10, 30, 100, 300, 600kHz. Automatic selection of one of the 57 resolution filters.
* On screen resolution of 51,101,145 or 290 measurement points.
* Scanning speed of over 1000 points/second using largest resolution filters.
* Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution bandwidth
* Spur suppression option for assessing if certain signals are internally generated or actually present in the input signal
-High input mode spec:
* Input frequency range from 240MHz to 960MHz
* As there is no input bandfilter strong signals outside the 240MHz to 960MHz range can cause distortion of the in band signals
* Absolute maximum input level without attenuation of +10dBm
* Input Intercept Point of third order modulation products (IIP3) of -5dBm
* 1dB compression point at -6dBm with 0dB attenuation
* Power detector resolution of 0.5dB and linearity versus frequency of +/-1dB
* Absolute power level accuracy after power level calibration of +/- 1dB
* Lowest discernible signal using a resolution bandwidth of 30kHz of -115dBm
* Frequency accuracy equal to the selected resolution bandwidth
* Spur free dynamic range when using a 30kHz resolution bandwidth of 50dB
* Selectable (automatic and manual) resolution filters of 3, 10, 30, 100, 300 and 600kHz
* Optional 25dB to 40dB frequency dependent input attenuator. The power level error with this attenuator activated increases to +/- 10dB
* On screen resolution of 51,101,145 or 290 measurement points.
* Scanning speed of over 1000 points/second using largest resolution filters.
* Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution bandwidth
-Low output mode spec:
* Sinus output with harmonics below -40dB of fundamental
* Output frequency range from 100kHz to 350MHz(Minimum frequency step 312.5Hz)
* Output level selectable in 1dB steps between -76dBm and -6dBm
* Optional AM, narrow FM and wide FM modulation or slow sweep over selectable frequency span
-High output mode spec:
* Square wave output
* Output frequency range from 240MHz to 960MHz(Minimum frequency step 312.5Hz)
* Output level selectable in variable increments between -38dBm and +13dBm
* Optional narrow FM and wide FM modulation or slow sweep over selectable frequency span
-Reference generator spec:
* Optional square wave output with fundamental at -25dBm connected to high input/output
* Frequency can be set to 1MHz, 2MHz, 4MHz, 10MHz, 15MHz or 30MHz.
-Battery spec:
*Charging time max 1 hour on 500mA minimum USB port or USB charger
* Operation on fully charged battery for at least 2 hours.

 

IMG_5014

IMG_501undefined

IMG_5023undefined

undefined

Additional information

Ships From

China, United States

Reviews

There are no reviews yet.

Be the first to review “TinySA Spectrum Analyzer 100khz to 960Mhz Audio Spectrum Analyzer”

Your email address will not be published. Required fields are marked *